Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Los Angeles?
Aluminum fence installation in Los Angeles typically costs between $4,720 and $11,800 for a standard residential project in 2026. Most homeowners pay around $7,000 to $8,500 for roughly 150 to 200 linear feet of a mid-grade aluminum panel fence with one or two gates. The final price depends on total linear footage, fence height, gate count, terrain, and whether old fencing needs removal first.
We’re seeing those numbers consistently across Los Angeles neighborhoods, from Cheviot Hills to Studio City to San Pedro. If you’re planning a fence project this year, the numbers below reflect what we’re quoting right now, not what a national average suggests.
Aluminum Fence Installation Cost Breakdown (2026)
Aluminum isn’t the cheapest fence material. It sits above vinyl and below wrought iron, and the cost structure breaks down into materials, labor, gates, and site prep. Here’s what we’re quoting in Los Angeles in 2026.
| Line Item | Typical Los Angeles Range | Notes |
|---|---|---|
| Aluminum panels and posts | $1,900 – $4,800 | Mid-grade residential grade; 150 – 200 linear feet |
| Labor (installation) | $1,600 – $3,600 | Two-person crew, 1 – 3 days depending on terrain |
| Gates (each) | $350 – $900 | Single walk gate; wider double gates run higher |
| Post setting & concrete | $400 – $1,000 | Depends on post depth and concrete volume |
| Old fence demo & haul-away | $350 – $1,100 | Added when replacing existing wood, chain link, or pool fencing |
| Permit fees | $120 – $600 | Mostly required for fences over 42 inches in LA city limits |
For simple, flat lots in the San Fernando Valley, you can land at the low end of these ranges. For hillside properties in Mount Washington or Laurel Canyon, where crews are setting posts into decomposed granite or working on slopes, expect the higher end. It’s the labor that moves, not the panel cost.
Typical Job Sizes in Los Angeles
We quote three common aluminum fence jobs again and again across LA:
- Small yard enclosure (60 – 100 linear feet): $2,800 – $5,300. This covers a standard 4-foot fence around a front yard or side yard with one walk gate.
- Standard backyard perimeter (150 – 200 linear feet): $4,720 – $8,500. This is the most common job we quote. A 4-foot or 5-foot fence with two gates.
- Large property or pool enclosure (250 – 350 linear feet with multiple gates): $8,500 – $11,800. Pool-code fence heights push panel grades up, and the gate count adds up fast.
In Brentwood and Pacific Palisades, we quote more 5-foot and 6-foot privacy panel systems with ornamental finials, which sit near or above the top of the range. In neighborhoods like Eagle Rock and Highland Park, 4-foot standard panels with flat tops keep things closer to the lower end.
What Affects Aluminum Fence Installation Pricing in Los Angeles
Your quote is not determined by one number. These are the six legs that hold up every price we give:
- Linear footage. Aluminum panel systems are priced per linear foot, materials and labor both. A 40-foot difference can move your total by $900 to $1,800.
- Fence height. A 4-foot fence uses lighter panels and shorter posts. A 6-foot fence needs larger-radius posts, more concrete per hole, and heavier panel sections. LA pool code often requires a minimum 60 inches, and many homeowners take that to 6 feet for privacy.
- Site access and terrain. In hillside areas like Silver Lake and Echo Park, crews may not be able to get a post-hole digger where they need it. Hand-digging through rocky soil or clay takes longer. Sloped lots require rackable panels that cost more per foot than standard rigid panels.
- Gate count and style. One gate is standard. Three gates change the materials picture. Arched double gates, or gates with decorative scrollwork, run $500 to $1,400 alone.
- Removal and disposal of old fencing. If you’re pulling out old chain link or a rotting wood fence, that’s demo labor plus dump fees. Our quotes show this as a separate line item, so you see exactly what you’re paying for.
- Permitting. The City of Los Angeles requires a building permit for fences over 42 inches in most residential zones. The fee itself is modest, but it adds time. We handle the paperwork as part of the project.
Your contractor’s verification standards matter too, though that’s about what you get, not what the fence costs. Every Mason Remodeling crew member is background-checked and identity-verified under The Threshold Standard, and you receive the technician’s name and photo before the visit. That’s a standard we don’t trade away to shave a hundred dollars off a quote.
How to Save on Aluminum Fence Installation
You can move the price without cutting corners. Here’s what actually works in Los Angeles:
- Time your project in the off-season. Fence work slows down in January and February. Crew availability is better, and some suppliers discount panel inventory after the holiday rush. We honor written pricing regardless of season, but you’ll have more scheduling flexibility in the winter.
- Keep the footprint simple. Bigger panels and fewer posts reduce labor. If you’re fencing a rectangular lot, a conventional layout will always cost less than one with sharp turns, angles, or multiple elevation changes.
- Replace gates only if you need to. If an existing walk gate is in good shape and its style blends with the new fence, you can sometimes keep it. We’ll tell you honestly if that’s a bad idea. Usually it’s fine for one gate.
- Do the demo yourself, if you’re comfortable. Removing old fencing is straightforward labor. If you pull down the old panels and stack them for the city’s bulky-item pickup, you can save $350 to $1,100 on the demo line item. We’ll give you a clear list of what to remove and what to leave for the crew.
- Get a written price before you commit. This is the one that saves people real money, because it eliminates surprise invoices. Mason Remodeling delivers a written price on every project before a single tool is unpacked. No verbal estimate that grows on the final bill. If the number isn’t in writing, it isn’t a number.
Call us at (213) 632-5711 for a free estimate. We’ll walk the site, take measurements, and give you a written price that holds.
Aluminum vs. Other Fence Materials in Los Angeles
Aluminum competes with vinyl, wood, chain link, and wrought iron. Here’s how the numbers compare in Los Angeles as of 2026:
- Aluminum: $4,720 – $11,800. The middle option. Rust-proof, low-maintenance, available in heights and styles that satisfy pool codes.
- Vinyl: $4,130 – $10,620. Cheaper to buy, but vinyl panels crack in sustained heat and direct sun. In San Fernando Valley summers, that’s a real durability question.
- Wrought iron: $7,500 – $18,000+. The heritage look, but heavy panels mean deeper posts, more concrete, and a more expensive install. Wrought iron also rusts unless it’s regularly stripped and repainted.
- Chain link: $1,800 – $4,500. The budget option, but it offers zero privacy and ages poorly in coastal neighborhoods where salt air accelerates the galvanization.
The reason many Los Angeles homeowners land on aluminum is the salt-air story. Homes within a few miles of the coast, from Playa del Rey to San Pedro, deal with marine layer moisture every morning. Aluminum doesn’t rust. Wood rots. Iron rusts. Vinyl gets brittle in the inland heat. Aluminum is the material that handles both the coastal fog and the Valley sun without asking anything of you.
If you’re considering a full aluminum fence installation in Los Angeles, the material discussion is usually simpler than people expect. It comes down to what you’ll still like looking at in ten years.
What to Expect During Installation
Here’s what the job looks like from start to finish, so there are no surprises after the first day:
- Site measure and written quote. We measure the full perimeter, note any terrain or access issues, and give you a written price. This happens before any deposit is discussed.
- Permit pull. For fences over 42 inches in Los Angeles, we file the building permit. The timeline depends on LADBS, but for most standard residential fence permits it’s one to three weeks.
- Post layout and dig. The crew marks post locations, digs to code depth (typically 24 to 30 inches in Los Angeles soil), and sets posts in concrete. This is the slow part. Each post needs a day to cure before panels go on.
- Panel installation. Aluminum panels are punched and bolted to the posts. A standard 150-foot fence goes up in one day once posts are set.
- Gate hardware and final walk-through. Hinges, latches, and self-closing hardware where pool code requires it. We walk the line with you before we call the job done.
Most aluminum fence installations in Los Angeles take two to four days total, including post-setting cure time. A straight forward flat-lot fence can be done in two. A hillside fence with multiple gates and tricky access might run toward a week.
Every Mason Remodeling project is covered by the 365-Day Done Right Promise. If the work isn’t right within a year of completion, we make it right at no cost. That’s 365 days from the completion date, and it’s written into every project we do.
FAQs – Aluminum Fence Installation Cost
How much does aluminum fence installation cost per foot in Los Angeles?
In Los Angeles, you’ll pay between $28 and $45 per linear foot for a complete aluminum fence installation in 2026, including materials, labor, and one standard gate. Simple 4-foot fences on flat lots land at the low end; taller pool-code fences or hillside installs land at the high end. Call (213) 632-5711 for an exact quote based on your measurements; estimates are free and written.
What does a 150-foot aluminum fence cost in Los Angeles?
A 150-foot aluminum fence in Los Angeles runs approximately $4,250 to $6,800 for a standard 4-foot fence with one gate, including labor and materials. A 5-foot or 6-foot fence on the same footprint typically runs $5,500 to $8,500. Your specific number depends on gate count and site conditions. We’ll measure and give you a written price before any work starts.
Do I need a permit for an aluminum fence in Los Angeles?
Yes, the City of Los Angeles requires a permit for any fence taller than 42 inches in most residential zones. Permit fees run $120 to $600 and are added as a line item on your written quote. Mason Remodeling handles the permit paperwork as part of the installation.
Is aluminum fence cheaper than wood or vinyl in Los Angeles?
Aluminum is more expensive than vinyl or basic wood fences, but cheaper than wrought iron. In Los Angeles, aluminum runs $28 to $45 per foot installed, while vinyl runs $23 to $33 per foot and a basic cedar fence runs $18 to $28 per foot. The trade-off is longevity: aluminum won’t rot from the marine layer or warp in Valley heat the way wood and vinyl do.
How long does aluminum fence installation take in Los Angeles?
Most residential aluminum fence installations in Los Angeles take two to four days from post setting to final hardware. A flat-lot fence with fewer than five posts can often be installed in two days, while hillside properties, fences over 200 feet, or multiple gates add time. We’ll give you a realistic timeline in your written quote before any work begins.
Can I install an aluminum fence myself to save money?
You can, and materials alone run $15 to $24 per foot at Los Angeles supply yards. But setting posts correctly through LA’s varied soil types, from sandy loam in the Valley to rocky terrain in the foothills, is not a weekend task unless you’ve done it before. A failed post line means a leaning fence and a redo. For most homeowners, the labor cost of a professional install buys a straight, level fence line that doesn’t shift in the first rain season.
Pricing reflects the Los Angeles market as of 2026. Mason Remodeling Co Los Angeles offers free estimates – call (213) 632-5711.
Written by Isaac Pruett, Owner at Mason Remodeling Co Los Angeles, serving Los Angeles since 2004.
What Our Customers Say
"Kitchen remodel with new cabinets, quartz counters, and a tile backsplash. Crew had ID and were background checked. Kept the work area clean and sealed off dust from the rest of the house."
- Janice D."Written scope, fixed price, and weekly updates. No change orders we hadn't agreed to."
- Carlos H."Basement refinish with egress window. Drywall finish is smooth and the electrician was tidy."
- Kyle S.
