Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Los Angeles Owner’s Guide
If you have Tremron product in your Los Angeles kitchen and something has failed, we can match the replacement part or complete the repair. Typical Tremron-related kitchen remodeling work in Los Angeles runs between $16,520 and $53,100 depending on scope, and we stock or can source Tremron-compatible components faster than most suppliers because we deal with this specific line regularly. Most homeowners discover a problem the way you probably just did: a cracked edge, a separating seam, a drawer that no longer closes square, or a countertop overhang that has begun to droop after years of heat and moisture from cooking.
Mason Remodeling Co Los Angeles is an independent contractor, not a Tremron dealer or affiliate. That matters because it means we tell you the truth about what should be replaced, what can be repaired, and what’s going to cost more than it’s worth.
Which Tremron Models This Applies To
Tremron is primarily known in Los Angeles for hardscape and concrete products, but many kitchens in the area incorporate Tremron pavers, caps, and edge treatments into interior flooring, island bases, or outdoor kitchen transitions. If your kitchen has Tremron concrete pavers, bullnose caps, or slab-style counter elements, the compatibility question comes down to measurement and era. Older Tremron units, particularly those installed before 2015, used a slightly different thickness tolerance than current production runs. That means a new paver may sit 1/8 inch proud of the surrounding field if you don’t account for it.
Here is the checkable distinction: measure the thickness of the failed unit. Tremron production today runs at nominal 60mm for standard pavers, but early Los Angeles installations often used 50mm or even 40mm units, and they are not interchangeable without a setting-bed adjustment. For counter or island cap pieces, note the overhang dimension and whether the piece is radiused on one edge. If you are deciding between an OEM Tremron part and a quality aftermarket equivalent, the aftermarket option usually works for field pavers, but edge pieces, caps, and anything with a visible profile should stay OEM so the color and profile match.
Styles & brands we work with
Signs Your Tremron Kitchen Remodeling Is Failing
- Cracking at the outside corners of island caps: Heat cycling from the cooktop or direct sun through a window causes differential expansion, and older Tremron caps sometimes lacked enough joint spacing to absorb it. The crack starts as a hairline and widens over a season or two.
- Efflorescence that keeps returning within weeks of cleaning: White chalky residue means moisture is moving through the concrete. In Los Angeles, that is almost always a failed seal or a drainage detail allowing water to sit against the back of the piece.
- Loose or rocking floor pavers near the sink or refrigerator: Underlayment breakdown is the usual culprit. The Tremron paver itself may be perfectly fine; the setting bed beneath it has likely washed or compacted.
- Chipped edges on bullnose or stair-nose pieces: Edge pieces take impacts from chairs, brooms, and dropped cookware. Once the factory edge is gone, the piece loses its seal integrity and begins absorbing water, which accelerates freeze-thaw and more chipping, even in mild LA winters.
- Color drift between replaced and original pieces: Concrete color stabilizes with age. A replacement piece installed today will not match a 12-year-old adjacent piece exactly, and if someone previously “spot patched” with a close-enough paver, you will see it from across the room.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Tremron-specific kitchen work in Los Angeles, the installed price range is $16,520 to $53,100. That covers everything from isolated paver and cap replacement with setting-bed correction on the low end, to a full kitchen floor and island rebuild using matched Tremron material on the high end. What drives the spread: square footage, whether we are removing and resetting cabinets to get under them, the condition of the subfloor or setting bed, and whether your edge pieces are still in production or need to be milled from larger Tremron units.
Every price we give is written. Before work starts, you get a line-item breakdown of materials and labor. No change orders unless you change the scope. The workmanship carries the 365-Day Done Right Promise: if something is not right within a year of completion, we come back and make it right at no cost. Our material partners include KraftMaid, Cambria, and Silestone when the project expands beyond Tremron into surrounding kitchen surfaces.
DIY or Call Us?
A homeowner can do useful diagnostics: measure the failed piece, note whether it is a field unit or an edge piece, and check if the surrounding pieces still sit tight. What goes wrong with DIY is almost always the setting bed. If you pull a cracked Tremron paver and simply set a new one in the same spot without correcting the base, the new piece will fail within a season. For edge pieces and caps, the bond line and joint material have to be matched to the original or the repair will be visible and will fail at the seam.
This is not high-tension dangerous work like a garage door spring, but it is exacting. A bad setting bed wastes the cost of the part. If you are not certain what is under the failed piece, call (213) 632-5711 and we will tell you what we would do before we ever schedule a visit.
FAQs
Field pavers installed correctly in an interior Los Angeles kitchen typically last 30 to 40 years, but edge pieces and caps often need attention at the 12- to 20-year mark because they take more impact and heat exposure. Call (213) 632-5711 if you are seeing edge chipping before year 15; it usually means a seal or drainage issue is accelerating wear.
Hairline cracks can sometimes be stabilized with an epoxy injection and color-matched seal, but any crack that runs through the full thickness or sits at a load-bearing edge should be replaced rather than patched, because a filled crack on an island cap will re-open with thermal movement. We will tell you which path is cheaper over five years, not just today.
A single-piece or small-section replacement is one day if the setting bed is sound; a full floor with bed correction is typically three to five working days including cure time before foot traffic. The estimate you get includes the schedule.
We keep common Los Angeles-demanded Tremron field units and some cap profiles in our inventory, and we source non-stock OEM pieces direct from regional suppliers, usually within three to five business days. If the exact legacy unit is discontinued, we will bring samples and show you the match before any work is authorized.
Know who’s coming, know what it costs, know it’s guaranteed. Everything else is just noise.
Call (213) 632-5711 to schedule a free estimate for your Tremron kitchen repair in Los Angeles. You will get a written price, a named crew with photos before they arrive, and a one-year guarantee in plain language.
Written by Isaac Pruett, Owner, Mason Remodeling Co at Mason Remodeling Co Los Angeles, serving Los Angeles and nearby areas.
