Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Los Angeles Owner’s Guide
Ameristar kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 installed, depending on whether you’re replacing a single failed component or rebuilding the whole kitchen around it. We stock Ameristar-compatible cabinetry, hardware, and trim parts on our trucks, and we can usually match your existing setup the same week you call. The way most Los Angeles homeowners find us is simple: a hinge gives out, a drawer front splits, or the finish on a door starts peeling, and suddenly a kitchen that looked fine six months ago looks tired.
We’re an independent service provider, not affiliated with Ameristar. That matters because we’re not here to sell you a full replacement when a targeted fix will do. We’ll tell you which is which.
- Ameristar kitchen work in Los Angeles spans $16,520 to $53,100 installed
- We carry Ameristar-compatible parts locally, so you’re not waiting on a freight shipment
- Free written estimate before any work starts, every time
- 365-Day Done Right Promise covers the work for a full year
Which Ameristar Models This Applies To
Ameristar built cabinetry across several series lines, and the compatibility gotcha most owners hit is hinge spacing. Ameristar’s older door lines used 3-inch and 3.5-inch hinge centers, while their later builder-grade boxes standardized on 42mm and 48mm cup hinges. If you order the wrong hinge and drill fresh holes, you’ll likely split the stile, and then you’re replacing the door, not the hardware. We’ve seen it happen in kitchens across Los Angeles, from West Adams to Highland Park.
The quickest way to identify what you have: open a door, look at the inside face for a printed label or burned-in lot code, and measure the distance between the hinge screws. Take a photo with your phone. If the label is gone, the measurement usually tells us what we’re working with. OEM Ameristar parts are still available for many lines, but for hinges, drawer glides, and shelf pins, quality aftermarket equivalents from Blum, Salice, and Hafele often outperform the originals at 30 to 40 percent less. We’ll give you the honest choice, not the upsell.
One California-specific reality: Ameristar doors and drawers don’t love LA’s dry inland heat. Solid wood and MDF cores expand and contract through our swing from 10 percent humidity in October to 85 percent in June Gloom. Three seasons of that and you’ll see hairline cracks around the panel joints, even on cabinets that were installed correctly.
Styles & brands we work with
Signs Your Ameristar Kitchen Remodeling Is Failing
- Hinges that sag or won’t hold adjustment. This is almost always a worn hinge cup or a stripped screw hole in the stile. The fix is straightforward unless the wood around the screw is chewed out, which takes a threaded insert or a new door.
- Drawer fronts separating from the box. Ameristar’s older lines used glue-and-pin construction, and those pins are only about 5/8 inch deep. Once the glue dries out, the front starts pulling away under normal use. We see this constantly in Los Angeles rentals and older homes.
- Finish peeling or chipping at the edges. Doors and drawer fronts take the abuse, usually from steam, cooking oil, or cleaning products. Once the finish goes, the MDF underneath swells if water gets in, and at that point you’re looking at replacement rather than refinishing.
- Soft-close mechanisms that slam. The little piston inside the hinge or drawer slide wears out. If one side fails and the other doesn’t, the door closes crooked and wears the remaining hinge out faster.
- Shelf pins snapping or shelves dropping. Cheap pins and holes that have wallowed out over time. We upgrade these with steel pin sleeves when we do a partial rehab, which stops the problem permanently.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Los Angeles kitchen remodel tied to Ameristar work, full-scale replacement runs $16,520 to $53,100, while smaller scopes are more useful for matching failed parts: cabinet installation runs $4,720 to $15,340, countertop installation $2,360 to $7,670, and backsplash work $945 to $2,950. What drives the spread is the cabinet count, whether you’re keeping existing boxes and swapping doors and faces, and how much plumbing or electrical moves with the layout.
Every quote we write is a written price before any work starts. That includes parts, labor, haul-away, and whatever adjustment or alignment the new hardware needs. No surprise invoices, no change orders unless you change the scope yourself. The work is covered by our 365-Day Done Right Promise: if anything’s not right within a year of completion, we come back and make it right at no cost to you. That’s the guarantee, stated plainly, in writing.
DIY or Call Us?
You can safely check a few things: look for the model label, measure your hinge spacing, and take photos of the failing hardware. If a hinge just needs tightening, a Phillips screwdriver handles that in two minutes. What goes wrong for DIYers is drilling new holes in Ameristar doors without a jig: one off-center bit and the stile splits. We’ve also seen homeowners strip finish with the wrong cleaner trying to fix a wear spot. If the door core is exposed or the hinge screws won’t bite, stop and call (213) 632-5711. You’ll get a straight answer on whether it’s a fix or a replace.
FAQs
Ameristar cabinets, properly installed and maintained, last 15 to 25 years in Los Angeles before the boxes or doors need serious work. Hinges, drawer glides, and soft-close mechanisms are wear parts that typically fail at the 7 to 12 year mark and are worth replacing rather than living with. Call (213) 632-5711 and we’ll tell you whether yours are in the repair window or the replacement window.
Yes, hinges, drawer glides, shelf pins, and even separated drawer fronts are repairable in most cases. Doors with split stiles or swollen MDF cores are usually cheaper to replace than repair. We’ll give you both numbers and let you decide.
Most Ameristar hardware swaps and partial cabinet repairs in Los Angeles take 4 to 8 hours on site, with no overnight disruption. Full kitchen remodels run longer, typically 4 to 10 weeks depending on scope, and we put the timeline in writing before you commit.
We stock common Ameristar-compatible hinges, slides, shelf pins, and hardware on our service trucks, and we order doors, drawer fronts, and specialty pieces as needed. If you need a specific finish matched for Ameristar doors or drawers, call (213) 632-5711 for a free estimate and we’ll confirm inventory before we schedule.
We also maintain parts relationships for KraftMaid, Cambria, and Silestone lines, so if your kitchen has a mix of brands, we can handle the whole job without you chasing multiple vendors.
Know who’s coming, know what it costs, know it’s guaranteed – everything else is just noise.
If your Ameristar kitchen is showing wear, call Mason Remodeling Co Los Angeles at (213) 632-5711 for a free, written estimate. A live person answers, 24 hours a day, every day of the year.
Written by Isaac Pruett, Owner, Mason Remodeling Co at Mason Remodeling Co Los Angeles, serving Los Angeles and nearby areas.
