Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Los Angeles Owner’s Guide
If you’re searching for Boral roofing repair or replacement in Los Angeles, the installed price typically runs $470 – $2,125 for targeted repairs and $9,440 – $23,600 for a full roof replacement. Mason Remodeling Co Los Angeles stocks Boral-compatible tile, trim, and flashing parts and can usually have a named technician at your door within a day or two of your call. Most Los Angeles homeowners discover a Boral failure the hard way: a cracked tile after a Santa Ana wind event, a lifted hip ridge after heavy rain, or water staining on the ceiling that traces back to a broken underlayment seam. We’re at (213) 632-5711 when you’re ready to talk specifics.
Which Boral Models This Applies To
Boral’s Los Angeles footprint spans three main categories: concrete roof tile (the Mission and Flat Shake profiles you see across the San Fernando Valley and Pasadena), clay roof tile (the barrel-style used on Spanish Revival homes in Hancock Park and Los Feliz), and the Boral Steel line on a smaller set of commercial and custom residential jobs. Concrete tile and clay tile are not interchangeable: concrete tile is thicker, heavier, and cut differently at the head and tail. If you’re matching an existing roof, the critical identifiers are the tile profile name (stamped on the underside of most Boral tiles made after 1995), the tile length (usually 16 to 17 inches for concrete Mission, 19 to 21 inches for clay), and the head lap measurement. Get one of those three wrong and water finds its way under the tile field.
We recommend OEM Boral tile when matching an active-manufacture profile for color and profile consistency. For discontinued Boral colors or older clay profiles, quality aftermarket tile from a matching kiln source or a concrete match from an established manufacturer is often the realistic option. We’ll tell you plainly which route makes sense for your roof, and never install a tile that doesn’t match the surrounding field.
Roofing is one of the parts trade lines Mason Remodeling Co Los Angeles supports under the same written-price and verified-crew standards we apply to our cabinetry lines like KraftMaid and surface lines like Cambria and Silestone. We’re an independent service provider, not a Boral dealer or factory affiliate.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Cracked or chipped tile corners along the eave line. This is the most common Boral failure in Los Angeles, usually from foot traffic during gutter cleaning or AC servicing, not from manufacturing defects. A cracked tile left in place exposes the underlayment, which is not designed for permanent sun and water exposure.
- Granule loss on concrete tile that reveals the raw concrete underneath. Boral concrete tile sheds a little surface texture over time, but once you see bare gray concrete in patches, the tile’s weather barrier is compromised and water absorption accelerates, especially during our wet winter months.
- Displaced or missing hip and ridge tiles after wind. The mortar or screw-down caps along hips and ridges take more wind load than field tile. When they lift or shift, the fasteners have usually rusted or backed out, leaving a direct water path into the roof deck.
- Dark streaking on tile that doesn’t rinse away. In shaded Los Angeles canyons and coastal zones, mildew and algae embed in Boral’s textured surface. It’s cosmetic at first, but the biofilm holds moisture against the tile and shortens its life if left untreated for years.
- Water staining on the ceiling after the first real rain of the season. By the time interior stains appear, the underlayment has already failed under the tile and the leak is traveling. Tile hides underlayment deterioration, and Los Angeles’s long dry spells mean small leaks can smolder undetected for months.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Targeted Boral tile or flashing repair in Los Angeles runs $470 – $2,125 depending on whether we’re replacing a few field tiles, a hip/ridge section, or a valley flashing detail. A full Boral roof replacement runs $9,440 – $23,600, with the wide spread driven by roof pitch (steep Los Angeles hillside roofs cost more per square), number of roof penetrations like skylights and vents, and whether the existing underlayment is code-compliant or needs full re-sheet. Concrete tile replacement sits at the lower end of that range; clay tile and steel toward the higher end.
Every price we give is written, line-itemed, and fixed before we start. You’ll see the tile cost, underlayment, fasteners, flashing, labor, and disposal broken out separately. No change orders because we measured upstream. The work is covered by our 365-Day Done Right Promise: if anything we installed fails within a year of the completion date, we return and fix it at no charge, including a free second visit with no dispute process.
DIY or Call Us?
What a homeowner can safely do: document the damage with photos, check for obvious loose tiles or daylight visible at the eave from a ladder placed on solid ground, and clear debris from valleys and gutters if you’re comfortable on a ladder. What we’d never suggest: walking a Boral tile roof to make a repair. Walking tile without a foam board or roof boots cracks more tile than you had before, and a 5:12 or steeper Los Angeles roof in dry conditions has no forgiveness. Tile fastening, underlayment splicing, and hip/ridge re-bedding all require knowing how the water plane works, not just how the tile lays down. Isaac Pruett has spent two decades on residential roofs across Los Angeles County after training at LA Trade-Technical College, and even he plans every tile job from the eaves up, never the reverse. If you’re not certain, call (213) 632-5711 and we’ll give you an honest read over the phone before anyone sets foot on the property.
FAQs
A properly installed Boral concrete tile roof lasts 50 to 75 years in the Los Angeles climate, while the underlayment beneath it typically needs replacement every 25 to 35 years depending on sun exposure, roof slope, and whether the home is in a coastal salt-air zone or an inland dry-heat zone like the Valley. The tile itself is not usually the first thing to fail in Los Angeles; the paper beneath it is. Call (213) 632-5711 and we’ll inspect both layers before recommending anything.
No, a cracked concrete or clay tile cannot be structurally repaired; it gets pulled and replaced, though a hairline crack that hasn’t split the tile can sometimes be sealed with a compatible tile sealant to buy a season or two. The tile’s strength is gone once it cracks through, and Los Angeles’s thermal cycling will split it further within the year. Replacement is the only honest fix.
Most single-point Boral repairs like a few cracked field tiles, a valley flashing replacement, or a hip ridge re-bed take 1 to 2 days on site, including haul-off of broken tile and mortar. A full Boral re-roof on a typical Los Angeles single-story runs 5 to 8 working days depending on tear-off depth and weather. We’ll give you a written schedule with the price.
We keep common Boral Mission and Flat Shake concrete tile profiles, hip and ridge stock, valley flashing, and compatible underlayment on our trucks for Los Angeles service calls, which means most repair jobs don’t wait on a parts order. Discontinued colors and clay profiles may need a 3 to 10 day order window, and we’ll tell you that before you commit. Know who’s coming, know what it costs, know it’s guaranteed; everything else is just noise. Call (213) 632-5711 for a free estimate.
Written by Isaac Pruett, Owner, Mason Remodeling Co at Mason Remodeling Co Los Angeles, serving Los Angeles and nearby areas.
