Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Driveway & Pavers: The Los Angeles Owner’s Guide
Replacing or upgrading the driveway and pavers on a Mighty Buildings home in Los Angeles typically runs $8,260 – $21,240 installed, depending on square footage, base condition, and material choice. We stock Mighty Buildings-compatible paver systems and can usually have a crew on-site within a few business days to assess what you’ve got and give you a written number before any work begins. Most owners figure out something’s wrong when they notice pooling water, a paver that’s sunk or cracked, or edging that’s started to wander after a season of rain. If you’re seeing any of that, you’re in the right place.
Key Takeaways:
- Installed paver driveway cost in Los Angeles: $8,260 – $21,240
- We match Mighty Buildings-spec paver dimensions, not just “close enough” sizes
- Written price before work starts, every time
- 365-Day Done Right Promise on the completed job
- Call (213) 632-5711 and a live person answers, day or night
Which Mighty Buildings Models This Applies To
Mighty Buildings homes across Los Angeles generally ship with a compacted paver system rather than a poured slab, and the pavers themselves tend to run on the smaller side of standard: think 4×8-inch and 6×9-inch interlocking units with a shallow profile. That matters because a common mistake is swapping in a big-box paver that’s a quarter-inch thicker or wider and discovering the edging no longer seats and the slope toward the street changes. We match the original paver thickness and joint spacing, not just the color. If you can see a stamped mark on the underside of a paver, or you still have the original site plan from Mighty Buildings, that tells us the exact series. If not, we measure the existing units and the sand bed before quoting anything.
For owners, the OEM-versus-aftermarket decision usually comes down to lead time and series availability. Some original Mighty Buildings paver runs are discontinued, and chasing a matching lot means waiting weeks. A quality aftermarket equivalent that matches the dimension and color blend is often the better call, and we’ll tell you plainly when that’s the case. We also stock parts from brands like KraftMaid, Cambria, and Silestone when a project crosses from outdoors to in.
One Los Angeles-specific reality: the clay-heavy soil in parts of the Valley expands and contracts through wet-dry cycles more aggressively than the coastal basins. That puts real stress on the sand bed under any paver system. If your pavers started shifting after a rainy winter, the soil movement underneath is usually the culprit, not the pavers themselves.
Styles & brands we work with
Signs Your Mighty Buildings Driveway & Pavers Is Failing
- Pooling water that sits for more than an hour after rain. This usually means the base has settled unevenly or the original slope was lost. Left alone, standing water works its way under the pavers and accelerates the whole failure.
- A paver that rocks underfoot or has dropped below the adjacent row. That’s a sand bed that’s washed out or compacted unevenly, often from a downspout that dumps water right at the paver edge. It only gets worse with traffic.
- Edging that’s pulled away from the pavers. In Los Angeles heat, plastic edging gets brittle and spikes pop out of the compacted base. Once the edge lets go, the perimeter pavers start drifting within a season.
- Cracks running through multiple pavers in a line. That’s a base problem, not a single-paver problem. A cracked paver is a part swap. A line of cracked pavers means the compacted base underneath has failed and needs to be opened up.
- Sand or grit washing onto the sidewalk after every rain. Your joint sand is eroding, which means the pavers are losing the friction that locks them together. Re-sanding with the right polymeric sand buys you years if you catch it early.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest math for Los Angeles. A full Mighty Buildings-compatible paver driveway replacement runs $8,260 – $21,240 installed, with most homes landing in the $12,000 – $16,000 range. The spread comes from square footage, how much of the old base can be salvaged, paver series cost, and access. A partial repair, where we cut out a failed section and re-set pavers with fresh base and sand, often runs $2,000 – $5,000 depending on how far the damage spread. Paver patio work on its own lands at $4,130 – $12,980.
| Project | Installed Price Range (Los Angeles) |
|---|---|
| Paver Driveway Installation | $8,260 – $21,240 |
| Driveway Replacement | $5,900 – $16,520 |
| Paver Patio Installation | $4,130 – $12,980 |
| Partial Paver Repair / Re-Set | $2,000 – $5,000 (typical) |
Every number we hand you is a written, line-item price before a single tool leaves the truck. That includes demolition and disposal of the old pavers, base compaction, new or salvaged base rock, geotextile fabric where the soil calls for it, the pavers themselves, joint sand, and edging re-set or replacement. No change orders on the back end. The work is covered by our 365-Day Done Right Promise: if something isn’t right within a year of completion, we come back and make it right at no cost to you.
DIY or Call Us?
You can check a few things safely before picking up the phone. Walk the driveway after a rain and mark where water pools. Look at the edging for gaps or popped spikes. If a single paver is cracked but not sunken, that’s a straightforward swap if you have a matching spare. What you shouldn’t do is start pulling up a section of driveway to re-level it yourself. Once the base is disturbed, you need compaction equipment and the right sub-base material to restore it, and a hand-tamped patch will settle within months. In Los Angeles soil especially, a badly re-set section becomes a trip hazard faster than people expect.
If what you’re seeing is more than one paver out of place, or pooling water that doesn’t drain, call (213) 632-5711. We’ll send someone who knows Mighty Buildings-spec pavers, and you’ll get a written price before any work is scheduled.
FAQs
A properly installed paver driveway in Los Angeles lasts 25 – 40 years, with the pavers themselves often outlasting the base they sit on. What fails first is usually the sand bed and edging, not the paver units. Call (213) 632-5711 and we’ll tell you what your specific driveway needs.
Yes, if the base failure is localized, we cut out the affected section, re-compact the base, and re-set the pavers for roughly $2,000 – $5,000 depending on the area. If the base has failed across most of the driveway, a full replacement is the honest fix. We’ll show you exactly what we’re seeing before you spend a dollar.
Most residential paver driveway replacements in Los Angeles take three to five working days from demolition to final sanding and compaction. Partial repairs are often done in one day. We’ll give you a schedule in writing before the work is booked.
We stock common Mighty Buildings paver dimensions and source discontinued series through our hardscaping suppliers, including Belgard, Unilock, and Techo-Bloc lines. You never have to hunt down materials yourself. Call (213) 632-5711 and we’ll match what you have.
Know who’s coming, know what it costs, know it’s guaranteed, everything else is just noise. If your Mighty Buildings driveway or pavers are failing, the next step is a free estimate: call (213) 632-5711 and you’ll get an actual person on the line, right now, any hour of the day or night. We’ll set a time to look at the driveway, put the price in writing, and you decide from there.
Written by Isaac Pruett, Owner, Mason Remodeling Co at Mason Remodeling Co Los Angeles, serving Los Angeles and nearby areas.
