Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Los Angeles Owner’s Guide
PGT kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 for a full project, and Mason Remodeling Co Los Angeles stocks and installs PGT-compatible cabinetry, hardware, and trim components for kitchens across the metro area. Most homeowners discover they need us when a hinge pulls loose from a PGT cabinet face, a drawer slide binds mid-run, or a soft-close mechanism stops catching and lets the door slam. It starts as a small annoyance at 7 a.m. when you’re reaching for the coffee mugs, then it turns into the thing you notice every single time you walk through the room.
We’re an independent service provider, not affiliated with PGT, which means we’re free to tell you exactly which parts actually fit, which ones to skip, and whether a repair makes more sense than a replacement. Call (213) 632-5711 and a live person answers, day or night.
Which PGT Models This Applies To
PGT’s kitchen line spans several cabinet series that have shifted over the years, and the hardware version matters more than the cabinet color or door style. If you have PGT cabinets installed in the last 10 to 15 years, you’ll typically be looking at one of three hinge configurations: a 35mm cup hinge with a clip-on plate, a compact 26mm cup hinge on shallow overlay doors, or the older exposed-barrel hinge that predates the current soft-close generation. The easiest way to identify what you have is to pull one hinge off and look at the backside of the cup for a stamped two-digit code, or measure the hinge cup diameter in millimeters. That number tells us what we’re matching before we order anything.
For drawer hardware, PGT used full-extension undermount slides on most mid and upper-tier lines from roughly 2012 forward, but some earlier boxes shipped with side-mount epoxy-coated slides that are now discontinued. Here’s the compatibility gotcha in Los Angeles: the 26mm hinge series and the early side-mount slides are the parts most often misordered online, because the part numbers look nearly identical to the 35mm versions. We keep both on hand and verify the physical measurement on site. For OEM versus aftermarket, OEM PGT-flagged hinges and slides are worth the premium if you want the exact soft-close feel restored. Quality aftermarket equivalents from brands like Salice and Blum work fine on most PGT boxes, and they’ll save you 20 to 30 percent on the hardware cost without changing how the door sits.
Styles & brands we work with
Signs Your PGT Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay closed. The soft-close piston inside the hinge has lost hydraulic pressure, usually after 8 to 12 years of daily use. One door goes first, then the rest follow within a year.
- Drawers that bind halfway out or sag on one side. The nylon wheel inside an undermount slide has cracked or flattened. Once the bearing seizes, the drawer scrapes the cabinet face and shaves off the finish every time you open it.
- Screws pulling out of the cabinet face. This is a box substrate issue, not just a screw problem. Repeated torque or moisture swelling in the panel has wallowed out the pilot hole, and new screws alone won’t hold for long.
- A hinge that swings past its stop. The internal clip that limits door travel has broken, so the door opens too far and stresses the adjacent door or the cabinet frame corner.
- Rubber bumpers flattened or missing. You’ll hear doors closing with a sharp crack. It seems minor, but the impact transfers to the hinge cup and shortens the life of everything else on that door.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a targeted PGT hardware replacement on one run of cabinets in Los Angeles, you’re usually looking at $295 to $825 for the visit, parts, and labor when we’re swapping hinges, slides, and bumpers on a standard 10-foot upper-and-lower run. Full kitchen remodels involving PGT cabinetry, countertops, backsplash, and island work run $16,520 to $53,100, and we put that number in writing before anything gets ordered. The range is driven by how many cabinets you have, whether you’re refinishing or replacing door faces, the countertop material you choose, and how much modification the existing wall and floor conditions require.
What you get in that number: the parts themselves at our cost, the labor to remove and install each one, adjustment and alignment so every door gaps evenly, cleanup, and a written guarantee for 365 days from the completion date. If anything fails inside that year, we return free and make it right. No dispute process, no conditions.
Here’s the cost breakdown for common PGT-related kitchen work in Los Angeles:
- Kitchen remodel (full): $16,520 – $53,100
- Small kitchen remodel: $10,620 – $23,600
- Cabinet installation: $4,720 – $15,340
- Countertop installation: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Kitchen island installation: $3,540 – $11,800
DIY or Call Us?
Some PGT kitchen hardware issues are safe to check yourself. You can tighten a hinge screw if the plate is still solid, replace a flattened bumper with a stick-on pad, or clean debris from a drawer slide channel. None of that requires special tools or much risk.
Where DIY goes wrong is when the hinge cup has torn out of the door, the drawer slide has seized, or the door gap is off so badly the whole row looks crooked. Forcing a misaligned hinge back into place usually splits the cabinet panel, and at that point you’re paying to rebuild the box instead of replacing the hardware. Installing undermount slides also requires precise spacing or the drawer binds again within weeks. If you’d rather not turn a $300 hardware fix into a $3,000 cabinet replacement, call (213) 632-5711. We’ll tell you over the phone whether it’s worth our visit or something you can handle in ten minutes.
FAQs
Most PGT soft-close hinges and drawer slides last 8 to 12 years in normal Los Angeles use before the damping fluid loses pressure or a slide wheel fails. The dry heat and the salt air near the coast both shorten that lifespan slightly, but daily use frequency is the bigger factor. Call (213) 632-5711 if your hardware is hitting that age and starting to misbehave.
A soft-close hinge with a dead piston cannot be repaired; the damping mechanism is sealed inside the cup and isn’t serviceable. A hinge that’s simply loose can often be corrected with a larger screw or a threaded insert, as long as the cabinet panel hasn’t cracked. We’ll tell you which path you’re on when we look at the door, and the estimate is free either way.
A typical hinge, slide, and bumper replacement on one run of PGT cabinets takes 2 to 4 hours once the parts are confirmed, and we usually complete it in a single visit. If we have to order a discontinued slide or a specialty hinge cup, add a few days for delivery to Los Angeles. You’ll know the timeline before we start.
We carry the most common PGT 35mm and 26mm hinge cups, clip plates, undermount and side-mount slides, and bumper sets on our trucks serving Los Angeles, so most hardware swaps don’t require a second visit. For older or discontinued PGT series, we source the OEM part or a matched aftermarket equivalent and confirm the fit before installation. We also stock parts compatible with KraftMaid, Cambria, and Silestone kitchen products.
Know who’s coming, know what it costs, know it’s guaranteed – everything else is just noise.
If your PGT kitchen hardware is failing, call Mason Remodeling Co Los Angeles at (213) 632-5711. Isaac Pruett and our team will tell you what you’re dealing with, what it costs, and when we can get there. Free estimates, written prices, and a live person on the phone 24 hours a day.
Written by Isaac Pruett, Owner, Mason Remodeling Co at Mason Remodeling Co Los Angeles, serving Los Angeles and nearby areas.
